Vici 450 Dynacalibrator Manual do Utilizador descarregar pdf (Página 35)

Conﬁguration 5

in this conﬁguration (Figure 14), pump P1 draws gas in through the supply

inlet on the back panel and delivers it to accumulator AC1. The accumulator

smooths out pressure pulses, with the back pressure regulator providing

continuous pressure regulation to cover the dynamic range required. A tee at

the output of the accumulator splits the supply into carrier and dilution streams,

each of which is plumbed to a back-panel outlet port which must be plugged if

an external supply is used. These ports can be connected individually through

external scrubbing media (ﬁlters, driers, etc.) or simply looped to their respective

inlet ports. Filters F1 and F2 remove particulates from these two streams.





























































Figure 14: Diagram of conﬁguration 5

Advanced Theory of Operation

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Sem comentários

Vici 450 Dynacalibrator Manual do Utilizador Página 35