Vici 235 Dynacalibrator Manual do Utilizador Página 18
- Página / 31
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
14
Tubes Screen
Select the Tubes screen by touching the “Tubes” tab on the left hand side of
the display. On this screen, the following parameters are established:
Compound
To select the correct compound:
1. Touch the white area of the Compound text field to open the pull-
down menu.
2. Scroll down to select the desired compound. The pull down menu will
disappear and the compound name will update in the Compound textbox.
Note: If the compound is not in the table of compounds, then Manual
mode settings will be used for the calculation and input of flows/
temperatures for delivering the desired concentrations.
Permeation rate
Permeation Rate is the value supplied on the permeation certificate in
ng/min. To enter the correct permeation rate:
1. Touch inside the white area of the Permeation rate text field to open the
numeric input pad.
2. Use the numeric keypad to input the desired value.
3. Select “Enter” to apply any change and hide the input pad.
Select “Cancel” to revert to the original data and hide the input pad.
Select “Clear” to remove incorrect data and input new data
Temperature
Temperature is the value supplied on the permeation certificate in °C. If the
device is not certified, use the temperature on the device label.
To enter the correct temperature:
1. Touch inside the white area of the Temperature text field to open the
numeric input pad.
2. Use the numeric keypad to input the desired value.
3. Select “Enter” to apply any change and hide the input pad.
Select “Cancel” to revert to the original data and hide the input pad.
Select “Clear” to remove incorrect data and input new data
NOTE: If more than one tube will be in the permeation chamber, add the
additional tubes by touching the “+” sign on the overhead tab of the Tubes
input screen and repeating these operations.
Figure 8: Model 235 Tubes screen
Initial Set-Up
- Dynacalibrator 1
- Model 235 1
- Instruction Manual 1
- Symbols used in this document 2
- Table of Contents 3
- Introduction 5
- Specifications 7
- Getting Started 8
- Concealed Damage 9
- Unit Location 10
- Rear Panel Connections 11
- Front Panel Features 12
- Initial Set-Up 14
- READY STATUS LIGHT 15
- Configuration 17
- Tubes Screen 18
- Basic Operation 19
- Auto Mode 20
- Quick Glance Status Bar 21
- Historical Display Graph 22
- Analyzer Calibration 24
- Shutdown Procedure 25
- Advanced Theory of Operation 26
- Electrical Description 27
- Maintenance 28
- Model Number Breakdown 30
- Warranty 31
Manuais e produtos relacionados com Instrumentos de medida Vici 235 Dynacalibrator
(42 páginas)AEG Electrolux B98203-5-M Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein AEG Electrolux B98203-5-M.
Wir stellen 34 PDF-Handbücher AEG Electrolux B98203-5-M zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung, Kochbuch
Comentários a estes Manuais