Vici TCD2 Manual do Utilizador descarregar pdf (Página 7)

Components of the Detector Systems

Components of the detector system are listed in Tables 1 and 2. Check the

contents of the packages to verify that everything is present. Contact the

factory if anything is missing or damaged. (NOTE: damaged shipments

must remain with the original packaging for freight company inspection.)

Introduction

Description Quantity Product number

Detector cell, Nickel-Iron filament 1 TCD2-NIFED

Controller unit with power cord 1 TCD2-C

Includes: Cable, output 2 I-24010

1/16' zero dead volume union 2 ZU1C

Fused silica adapter for 0.53 mm ID x 0.8 mm OD capillary column 2 FS1R.8

1/16" zero dead volume nut 2 ZN1

1/16" zero dead volume ferrule 2 ZF1

Table 1:

Components of the TCD2-NIFE system

Description Quantity Product number

Detector cell, Tungsten-Rhenium filament 1 TCD2-WRE

Controller unit with power cord 1 TCD2-C

Includes: Cable, output 2 I-24010

1/16' zero dead volume union 2 ZU1C

Fused silica adapter for 0.53 mm ID x 0.8 mm OD capillary column 2 FS1R.8

1/16" zero dead volume nut 2 ZN1

1/16" zero dead volume ferrule 2 ZF1

Table 2:

Components of the TCD2-WRE system

Specifications

Mains (line): 115/230 V~50/60 Hz, 175 VA

Fuse: 2 A, time-delay, 5 x 20 mm

Pressure: 6.9 kPa (1 psi) operating, 6.9 MPa (1000 psi) max.

working

Maximum temperature 300°C

Heater power: 60 W max., 48 V, PWM

Output impedance: 100 Ω

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Sem comentários

Vici TCD2 Manual do Utilizador Página 7